The online source for fine custom knivesFree Shipping!!
ARTISAN MADE
Shop by Category
Shop by Maker
Shop by Price
Shop by Feature
Shop by Material
Shop by Blade Shape
New this Month
Web Specials

 OTHER PRODUCTS
Waterstones/Sharpeners
Knife Storage Cases
Jewelry
Books & CDs
Knife Care Products
Steel for Knifemaking

 STAFF PICKS & GIFT IDEAS
Staff Picks
Gift Ideas

 SERVICES
Sharpening Service
Knife Photography
Gift Registry
Gift Certificates

INFORMATION
About Us
Policies

SG2 Stainless/Nickel Damascus DPS San Mai - 31 layer (.12" x 16" x 1-3/4")

SG2 Stainless/Nickel Damascus DPS San Mai - 31 layer (.12
click for larger images

Rating: No reviews
add review | list reviews
Availability: Not currently available

product description

Related Products:
Takefu Special Steel
Damascus Blades & Billets
Damascus
Stainless - Damascus
Stainless - SG2

Product Description for SG2 Stainless/Nickel Damascus DPS San Mai - 31 layer (.12" x 16" x 1-3/4")

Maker: Takefu Special Steel (click to see more by this maker)
Item num: 98609
Total length: 16.00 in.
Item weight: 15.60 oz.
Size: .12" x 16" x 1-3/4"
Description: This 3mm thick bar of laminated Takefu steel is cut to 16 inches long and is 1-3/4 inches wide.
This is a pre-laminated bar featuring an SG2 stainless steel core with a DPS 15 Layer Cladding. This means that a central layer of premium powdered metallurgical SG2 stainless steel, is surrounded by alternating layers of stainless steel and nickel, for a total of 31 layers. The nickel acts as a barrier to stop carbon migration. When combined with layers of stainless steel, it creates a particularly dramatic and bold pattern. The linear layers can either be ground to shape or the bar can be forged, allowing for nearly endless patterns - from chevrons, to ladder, pool & eye and more.
SG2 (Super Gold 2) is powdered metallurgical steel with a fine grain structure. SG2 is free from impure substances and achieves good abrasion resistance. The addition of 15% Cr (chromium) provides good corrosion resistance while 2.8% Mo (molybdenum) makes a stronger substrate (matrix) and helps prevent carbides from dropping out of solution during heat treatment. The addition of V (vanadium) creates finer grain. The added Cr, Mo, and V form many hard carbides, so abrasion resistance improves. Fine grain and abrasion resistance gives knives long-term edge holding ability with a very keen, clean, cutting edge. SG2 is easily machinable and is also easy to grind and finish.

SG2 Specs
C CR Mo V
1.4% 15.0% 2.0% 2.8%

Heat Treatment
Forging: Forge at 1100°C/2012°F. Do not forge below 1000°C/1832°F. You should anneal after forging. SG2 can be forged using good forging practice, however when forging on edge, special care should be taken to avoid delaminating.
Annealing: Anneal at 880°C/1616°F. Cooling speed should not exceed 25°C/hr - 77°F/hr
Quenching: Quench at 1050-1100°C/1922-2012°F. Quench in oil (50°C/122°F) or air (25°C/77°F)
Tempering: Temper at 150-250°C (302-482°F). If you coat such as TiC, temper at 550°C/1022°F

Hardness
Annealed: Hrc 30
Hardened: Hrc 62
Sub-Zero: Hrc 62.5

Mastersmith Bill Burke's Heat Treatment Recommendation: After forging/annealing, grind blade to 220 grit (120 grit minimum) finish. Wrap in high temp stainless foil, being sure to seal air tight. Place blade in heat treat oven and ramp oven to 1560 °F and hold 30 minutes. Ramp oven to 2012°F and hold a maximum of 10 minutes. Air, oil or plate quench. Subzero quench at -112°F to -300°F for 60 minutes. Temper two times for two hours each cycle for desired hardness at 300 - 480°F.

SG2 Heat Treatment Chart

Note: results may vary with hardening method and section size. Salt or oil quenching will give maximum results. Vacuum or atmosphere cooling may result in up to 1-2 Hrc lower.


Availability: Not currently available

 
Home | View Cart | Check Out | Search | Empty Cart
customer service | privacy policy | guarantee | shipping options | about us

Phone Orders: 425-889-5980
Looking for Chef's Knives? Try http://www.EpicEdge.com

We Accept Discover, American Express, Visa, MasterCard, Check and Money Order
Epicurean Edge, Cutlery, Kirkland, WA
Comments and questions to info@bladegallery.com
Text and images protected by copyright. Copyright 2017-2020 BladeGallery Inc. All rights reserved.