Pronghorn Hunter (5 in.)

Product Description for Pronghorn Hunter (5 in.)

Maker: Ed Fowler, M.S. (click to see more by this maker)
Item num: 93824
*** This is handmade and one-of-a-kind ***
Blade length: 5.00 in.
Total length: 10.00 in.
Blade height (at heel): 1.16 in.
Blade thickness (near bolster): 0.18 in.
Blade thickness (at midpoint): 0.17 in.
Blade thickness (near tip): 0.15 in.
Item weight: 18.00 oz.
Shipment weight: 11.2 oz.
Blade: Hand forged 52100 carbon steel with a low temp triple quench and triple temper for high performance edge retention
Bolster: Brass
Handle: Sheep horn
Sheath: Waxed harness leather pouch style sheath
Description: Mastersmith Ed Fowler's knives are the hallmark of a perfected high performance knife. Ed's heat treatment creates some of the sharpest and most long lasting edges found anywhere.
The blade was forged at low temperature from 52100 carbon steel. This is a high carbon, high chrome steel in a very pure form and results in a knife steel that is as good as it gets. It was subjected to a minimum of 30 low temp thermal cycles, which requires a lot of hammer work. The blade was carefully hardened three times using a differential hardening technique developed by Ed in conjunction with Mastersmith Bill Burke for this steel. Triple tempered to push the steel to the limit, these blades are easy to sharpen, yet hold an edge better than any I have tested. A differential heat treatment line is clearly visible in the steel.
The large sheep horn handle fits comfortably into the hand. When wet, sheep horn does not become slippery, and it is amazingly durable. The spacer is created by taking two sheep horn end cuts and aligning them outward, producing a very pleasing effect. The brass guard features Ed's signature willow bow engraving. His maker's mark is located on the left ricasso, oriented toward the spine. Excellent fit and finish throughout


Availability: Not currently available